乘用车DCT车型的动力性提升分析与实施

为满足公司的发展战略要求,需要打造一款高性能、运动操控性车型,为提升该款乘用车DCT车型的动力性和操控型,分别从车辆的起步、加速过程的扭矩发挥和换挡结束的扭矩恢复、换挡过程的扭矩交替时间和转速同步时间、换挡线加速度和动力升挡换挡线及硬件五个方面进行优化。论文对该车型的起步加速过程以及换挡过程的扭矩控制进行详细分析,并将五个优化方向分解为13个子项,分别对各子项优化效果进行分析,通过INCA软件对车辆的控制系统进行优化,经过实际道路测试满足了目标开发要求。     

矩形顶管关键技术研究现状及发展趋势探讨

首先，对矩形顶管技术的发展历程及其国内外研究现状进行综述，介绍当前矩形顶管技术主要的应用场景，并结合顶推力预测、注浆减阻、背土效应演化机制和控制对策、顶进过程中的地层响应模式和沉降计算、工作面稳定性评估等关键技术问题，对矩形顶管的理论研究进展进行回顾和讨论。其次，根据矩形断面掘进机的结构形式和切削方式，对国内外矩形顶管掘进机的开发现状及其分类进行介绍。最后，归纳当前矩形顶管在装备及工程应用领域面临的技术挑战，探讨矩形顶管技术的发展趋势，对矩形顶管装备智能化，矩形曲线顶进，长距离、大断面及复合地层等复杂场景下的矩形顶管技术进行展望。     

混合对转推进系统设计与实船应用研究

为全面深入了解混合对转推进系统实船安装对船舶性能影响,为数值仿真和性能预报提供实船参考数据,以集装箱运输船为应用对象,提出了一种把吊舱推进器集成在挂舵臂上的混合对转推进系统(CRP-POD),详细阐述了CRP-POD的系统构成、工作模式和电气控制系统实船设计方案。通过实船试验和运行数据分析,安装混合对转推进系统的船舶与同系列安装常规推进系统的船舶相比,特定航行工况下航速有2~3%的提升、回转能力有所降低、航向稳定性上优于常规船。     

基于连续-离散混合模型的船舶推进轴系纵向振动动力吸振分析

以直接传动形式的船舶推进轴系为研究对象,基于连续-离散混合模型,开展推进轴系纵向振动动力吸振设计分析。采用直接法和模态叠加法计算比较推进轴系在螺旋桨脉动推力下的频率响应,识别出第1阶模态是优势模态。结合Lagrange方程和模态展开定理推导出推进轴系连续-动力吸振器离散混合模型的动力学方程,采用动力调谐优化方法对动力吸振器进行优化设计,在优化状态下讨论动力吸振器的控制效果和参数影响规律。分析结果表明:动力吸振器安装位置应尽可能接近螺旋桨端,以减小动力吸振器动力参数值;第1阶共振线谱的减振效果与动力吸振器安装位置无关,仅取决于其质量比。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

车辆协同巡航控制系统设计改进与试验评价

为提高交通流运行的机动性、稳定性，对车辆协同巡航控制(CACC)系统进行了改进设计. 基于经典Newell 模型提出了考虑CACC的改进跟驰模型，分析了所提出的CACC改进跟驰模型的动力学特性，给出了CACC改进跟驰模型的线性稳定性条件，并对由CACC车辆和非CACC车辆组成的非均匀车队的不同无线通讯拓扑结构进行了比较研究. 通过数值试验进一步研究了在起步、刹车和意外事件的情况下，CACC车辆的存在对交通流动力学的影响. 研究结果表明，通过合理设计CACC跟驰系统的模型参数取值后，CACC车辆的存在一方面可以提高交通流运行的机动性与稳定性，另一方面可以使交通出行更加的安全和舒适. 此外，由于不同车队中CACC车辆的无线通讯拓扑结构会影响交通流的机动性与稳定性，对于 CACC车辆的无线通讯拓扑结构应慎重的设计与优化.     

深海工程船锚泊仿真系统研究

为了实现工程船定位和控位快速模拟仿真,本文以45000DWT海洋工程船为例,采用均匀设计试验方法,确定深海船舶工作不同的工况组合,基于Ansys-Aqwa软件对工程船深海锚泊动态响应进行仿真分析,对仿真结果进行回归处理,得到船舶位移和锚索张力与锚索长度、风浪流环境载荷变化的数学响应模型,再对位移数学响应模型进行求反函数处理,获取船舶控位调整锚索长度的方法,为深海锚泊软件仿真系统提供模型支撑。     

Validation and application of nonlinear hydrodynamics from CFD in an engineering model of a semi-submersible floating wind turbine

Nonlinear hydrodynamics play a significant role in accurate prediction of the dynamic responses of floating wind turbines (FWTs), especially near the resonance frequencies. This study investigates the use of computational fluid dynamics (CFD) simulations to improve an engineering model (based on potential flow theory with Morison-type drag) by modifying the second-order difference-frequency quadratic transfer functions (QTFs) and frequency-dependent added mass and damping for a semi-submersible FWT. The results from the original and modified engineering models are compared to experimental data from decay tests and irregular wave tests. In general, the CFD results based on forced oscillation tests suggest increasing the frequency-depending added mass and damping at low frequencies compared to first order potential flow theory. The modified engineering model predicts natural periods close to the experimental results in decay tests (within 5%), and the underprediction of the damping is reduced compared to the original engineering model. The motions, mooring line tensions and tower-base loads in the low-frequency response to an irregular wave are underestimated using the original engineering model. The additional linear damping increases this underestimation, while the modified QTFs based on CFD simulations of a fixed floater in bichromatic waves result in larger difference-frequency wave loads. The combined modifications give improved agreement with experimental data in terms of damage equivalent loads for the mooring lines and tower base.     

高速铁路线路参数与线路方案动力分析研究

线路线形条件对高速铁路行车安全性及乘坐舒适性的影响显著增强。我国在制定高速铁路规范时,总结吸收国内外建设及运营管理经验,提出了较高的线形标准。采用动力仿真分析方法对高速铁路参数进行探讨,对高速铁路线路关键参数进行分析,提出线路平、纵断面关键参数合理取值。针对京沈高铁试验段开展更高速度综合实验,对线路线形方案开展动力学分析及评估。提出线路圆曲线、反向曲线夹直线最小长度、竖曲线最小半径关键参数合理取值,可有效减少工程建设投入;通过对京沈高铁试验段开展更高速度综合实验,对线路线形方案开展动力学分析及评估,提出通过增加8 000 m曲线半径超高的方法,提高速度400 km/h列车舒适度。